Description
79 Inch 3D Pro K2 Single Stretcher Bar 2-1/2" Deep K2-79
Keep scrolling down to learn all the details about this product and your art . . .
3D™ Pro K2 Stretcher Bar is the ultimate 2-1/2" museum quality Stretcher Bar system. This item is for one Stretcher Bar. Cross Braces may be ordered to create a frame that has multiple cross braces up to 16 crosses for the largest size. Frame support is the most important part of your canvas frame, because it makes it possible to achieve the maximum canvas tension. To add tension to your stretched canvas, simply press the brace keys further into their respective slots.
3D™ Pro 2.5 Stretcher Bar • 1/2" Canvas Clearance
1/2" Canvas Clearance is the space between the Bar and the canvas. Generally speaking, more clearance reduces the risk of the canvas touching the wood and creating unsightly lines during painting. Our design provides the optimal clearance so as not to impact your painting, but still leaving enough wood to the maximize strength of the Stretcher Bar.
- Produces a 2.5" deep stretched canvas (Actual depth is slightly thinner)
- 1.25" wide Stretcher Bar
- All Bars have an exclusive groove on the inside perimeter of the frame to which cross braces and Diamond Corner Braces attach
- Solid Ponderosa Pine or Fir from the Pacific Northwest
Finger Jointed Wood is not meant for Stretcher Bars
Solid wood makes the most dependable Stretcher Bar, because one homogeneous wood member is going to behave similarly across the entire length of the Bar. Whereas, with finger-jointed wood is made-up of multiple pieces of wood, sometimes on the actual joint itself, presenting multiple points of failure which no one can control.
We only use Solid Wood to build our Stretcher Bars because a solid piece of wood will last indefinitely. When we speak of archival value, it's not just the paint you use and the quality of your canvas and ground, even the wood choices manufacturers add or reduce value to your final painting. The fact is, you don't want problems, and finger joints only increase that risk of the wood falling apart in the future.
The glue used to bind finger joints is a water based adhesive and when that wood is exposed to high humidity environments, particularly with exterior walls, the glue joints can give-up. As a manufacturer, Masterpiece® does its part to conserve as much wood as possible, and still provide a quality product that will out-perform any other in the marketplace.
Sustainability is about Reducing Deforestation
Choosing products made with sustainably sourced lumber is an important way for consumers to make a positive impact on the environment. By supporting sustainable forestry practices, we can help to reduce deforestation, promote biodiversity, and mitigate climate change. It's a simple and effective way to make a difference.
Canvas Size Needed for this Stretcher Bar
Most artists will stretch the canvas and attach the staples or tacks onto the back side of the frame. Doing so allows you to paint on the edge and hang your art without needed a picture frame. Generally speaking, you should allow 8 Inches of canvas beyond the size of your frame.
For example, if you were to stretch a 58x79 frame size, which happens to be a custom proportion, your canvas should be about 66 x 87. This allows you ample room to stretch and attach the canvas on the back. Should you ever need to remove the canvas from the frame and re-attach it, it still serves that purpose too. Should you want to attach the canvas from the edge of the stretcher frame, then you can reduce the size of your canvas about 3/4" all the way around the frame.
From the heart of California, Masterpiece® has been weaving a legacy since 1965, curating the best Stretcher Bars North America has witnessed. Our unwavering dedication to quality and innovation has cast us in the limelight as the trendsetting stalwarts in the realm of fine-art canvases. The patents we hold are not just certificates but validations of our pursuit of perfection. Engage with our creations and feel the promise of unmatched quality, a promise that resonates with your clients and every future beholder of your masterpiece.
One must dare to be oneself.
♦ Paul Gauguin
Paul Gauguin, a post-Impressionist artist known for his bold use of color and experimental approach to form, lived a life defined by audacious decisions. Leaving behind a stable life in Paris, Gauguin sought uncharted territories, first in the rural areas of France and later in the distant shores of Tahiti. His departure from the conventional was not just geographical but also aesthetic. He sought a deeper, more primal truth in his art, unshackled by European norms and ideals.
His assertion on the courage it takes to be genuine speaks to the heart of every artist. The art world, with its evolving trends and shifting standards, often demands conformity. Yet, true artistic vision emerges when we, as artists, find the strength to manifest our innermost convictions on canvas, in clay, or through any medium we choose. Gauguin's words remind us of the power and authenticity that arises when we embrace our individuality in our work and our lives.
We hope to inspire your art with this wonderful quote and our interpretation along with our own one-of-a-kind portrait of Paul Gauguin..got to love it!
Additional Details
- SKU:
- K2-79
- Canvas and Depth:
- 2.50 in. K2 Bar 3D Pro Bar
- Length:
- 79 Inch